This step by step diy woodworking project is about computer desk plans. If you want to learn more about building a diy desk, we recommend you to pay attention to the instructions described in the article. There are so many desk plans and designs to choose from, so make sure you take a close look over the rest of the related woodworking projects that are featured on our website.
Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the desk to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.
If you don’t have a rich expertise in woodworking field, you should ask a friend to give you a hand with the project. There are many things that you could go wrong, so make sure you plan everything and invest in quality materials. Select the lumber with attention, making sure the components are perfectly straight and in a very good condition. Use a carpentry square to check if the corners are right-angled. See all my Premium Plans in the Shop.
Made from this plan
Computer desk plans
Building a desk
Materials
- A – 4 pieces of 2×2 lumber – 29 1/4″ long LEGS
- B – 2 pieces of 3/4″ plywood – 5 1/2″x17″ long, 1 piece – 5 1/2″x37″ long PANELS
- C – 2 pieces of 1×2 lumber – 37″ long, 2 pieces of 1×3 lumber – 17″ long, 1 piece – 18 1/2″ long SUPPORTS
- D – 2 pieces of 1×4 lumber – 16 1/4″ long, 2 pieces – 16 5/8″ long, 1 pieces of 3/4 plywood – 16 1/4″x15 1/8″ long 2xDRAWERS
- E – 1 piece of 3/4″ plywood – 21″x42″ long TABLETOP
- 1 piece of 2×2 lumber – 10 ft
- 1 piece of 1×2 lumber – 8 ft
- 1 piece of 1×3 lumber – 8 ft
- 2 pieces of 1×4 lumber – 8 ft
- 1 piece of 3/4″ plywood – 4’x8′
- 2 1/2″ screws
- 1 1/4″ screws
- glue, stain
- wood filler
Tools
- Safety gloves, glasses
- Miter saw, jigsaw
- Chalk line, tape measure, spirit level, carpentry pencil
- Drill machinery and drill bits
Tips
- Apply several coats of wood stain to the wooden components
- Fill the holes with wood filler and smooth the surface
Time
- One Day
Related
Building a desk
Building the sides of the desk
The first step of the project is to build the sides of the vanity. Build the legs out of 2×2 lumber and the panels out of 3/4″ plywood. Drill pocket holes along the sides of the plywood pieces and secure them to the legs with galvanized screws. Add waterproof glue to the joints and remove the excess with a damp cloth.
Building the frame of the desk
The next step of the woodworking project is to lock the sides of the vanity together with galvanized screws. Drill pocket holes at both ends of the supports and secure them to the legs using 1 1/4′ screws. Add glue to the joints and make sure the corners are right-angled.
Fitting the supports
The next step of the project is to fit the 1×3 supports into place. Cut the supports at the right size and lock them to the frame using galvanized screws. Place the middle support equally-spaced from the two sides.
Building the drawers
Build the frame of the drawers out of 1×4 lumber and the bottom component out of 3/4″ plywood. Leave no gaps between the components and add glue to the joints, in order to create a rigid and durable structure.
Attaching the tabletop
Center the frame of the desk to the tabletop, drill pilot holes through the supports and insert 1 1/4″ screws. Add waterproof glue to the joints and leave no gaps between the components.
Fitting the drawers
Fit the drawers to the frame of the bar, by using appropriate slides. Make sure the drawers open and close properly and make adjustments, if necessary.
Fitting the drawer faces
Attach the faces to the drawers, making sure you leave a 1/8″ gaps around the edges. Drill galvanized screws from the inside into the faces and add glue to create a durable bond.
Computer desk plans
Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Afterwards, smooth the wooden surface with fine-grit sandpaper and vacuum the residues.
Thank you for reading our project about vanity plans and we recommend you to check out the rest of the projects. Don’t forget to SHARE our projects with your friends and LIKE us, by using the social media widgets. SUBSCRIBE if you want to be the first that gets our latest articles.
